Instanta Titan Pro Bulk Installation And User Instruction Manual

Water boiler

Advertisement

Titan Pro Bulk Water Boiler
MOD18
INSTALLATION and USER INSTRUCTION MANUAL
Serial Number: __________
IB18 - Issue: 3

Advertisement

Table of Contents
loading

Summary of Contents for Instanta Titan Pro Bulk

  • Page 1 Titan Pro Bulk Water Boiler MOD18 INSTALLATION and USER INSTRUCTION MANUAL Serial Number: __________ IB18 - Issue: 3...
  • Page 2: Table Of Contents

    Your new Water Boiler is designed to give years of trouble-free service provided that the instructions contained in this manual are followed. Instanta products are energy efficient, simple to operate and easy to service. Installation is straightforward but it is recommended that this, be carried out by a properly qualified fitter.
  • Page 3: Warning And Precautions

    Damage to the appliance caused by excessive scale build-up may invalidate the warranty – see notes on de-scaling. Drawings, parts list, circuit/wiring diagrams are the sole property of Instanta Limited and must not be reproduced without their consent. This appliance is not intended for use by persons (Including Children) with reduced...
  • Page 4: Installation

    In hard water areas it is advisable to fit a scale reducer to limit scale deposits. Important: We regret that Instanta cannot be held responsible for scale related problems or for machine malfunction where the water pressure exceeds or is less than the limits above.
  • Page 5: Electrical Connection

    IMPORTANT: While reasonable precaution is taken to prevent an overflow, Instanta cannot be held responsible for any damage caused as a result of incorrect installation or blockage of the overflow.
  • Page 6: Initial Commissioning

    5.0 INITIAL COMMISSIONING OF THE BOILER  Remove protective plastic coating from all surfaces  Attach a swivel-dispense arm to each of the draw-off taps  Ensure that the taps are both in the closed position  With all appropriate services connected, turn on the water supply ...
  • Page 7: User Instructions

    6.0 USER INSTRUCTIONS DAILY OPERATING INSTRUCTIONS In daily use, switch the machine on and wait until the amber “ready” light illuminates. Once the “ready” light illuminates the boiler is ready for use. Heat-up time from cold depends on the volume of stored water in the boiler from the previous day.
  • Page 8 If the service light flashes refer to the diagnosis codes at the back of this manual. Other technical information available: Spare Parts List: Order Ref: INS-MOD18SP Service/Maintenance Manual: Order Ref: INS-MOD18SVC Please order direct from Instanta Limited, Spares Department: 01704 501114...
  • Page 9: De-Scaling

    8.0 DE-SCALING THE BOILER It is recommended that the appliance be de-scaled regularly:  To de-scale the machine, first isolate from the electrical power supply.  Remove outer lid (insert the tip of a screwdriver into gap between case and lid and twist on each corner).
  • Page 10 The machine has over-boiled and Call Instanta service the level has fallen to a point at department which the element(s) could be Quoting the Serial Number damaged. INSTANTA LIMITED, Canning Road, Southport, Merseyside PR9 7SN Tel: 01704 501114 Fax: 01704 501115...

This manual is also suitable for:

Mod18

Table of Contents