Caution Safety: All personnel must be followed. provided with suffi cient and appropriate training in the safe use of this appliance. All new series Instanta products are energy Model Width Depth Height Power...
WARNING: This appliance must be earthed. the Earth wire connection to the bottom of 3.0kW Units: (WM3, WM3SS, WM7, WM7SS, Electrical installation should conform to A 15mm stop valve must be fitted between the boiler-case (screw & washer supplied).
To disable the override feature, enter Program the display shows “SET CLOCK TIME mode as previously described and advance Cleaning (Not WM3 & WM3SS models) (24h)” again. Continue through the menu by through the menu until “TIMER OVERRIDE” is pressing the button (short-pushes).
To clean the probes refer to ‘Descaling’ Isolate from mains electrical power. Multi-Filters (AQ35), spare parts and accessories Service Warnings & Fault are available from Instanta Limited – Critical Warnings [2]: Remove outer case (2 screws top & Diagnostics Tel: 01704 501114 and ask for spares bottom).
Full Program Menu Service/Technical Support SET WATER TEMPERATURE [Adjustable: 80 & 99 C - Your boiler SET CLOCK TIME (24h) Tel: 01704 502911 has been factory-set. We do not recommend increasing the factory-set temperature] SET CLOCK – HOURS To ensure your service enquiry is handled as SET FILTER CAPACITY efficiently as possible, please have the following SET CLOCK –...
Need help?
Do you have a question about the WM3 and is the answer not in the manual?
Questions and answers