Related Manuals for Instanta Barista Pro WB-2
Summary of Contents for Instanta Barista Pro WB-2
- Page 1 Barista Pro Range MODELS: WB-2 & WB-2/6KW Auto-Fill Catering Steam & Water Boiler INSTALLATION AND USER INSTRUCTIONS INSTANTA LIMITED Canning Road - Southport – Merseyside - PR9 7SN Tel: (01704) 501114 - Fax: (01704) 501115 IB2 - ISS: 02...
-
Page 2: Table Of Contents
Your new water boiler is designed to give you years of trouble-free service provided that the instructions contained in this manual are followed. All new series Instanta products are energy efficient, simple to operate and easy to service. Find out more about Instanta products at... - Page 3 Keep these instructions in a safe place near the unit for future reference PLEASE NOTE: These units should be insured and inspected annually by a ‘competent person’, in-line with the Pressure Equipment Directive. For further information, please contact Instanta Technical Dept. ENVIRONMENTAL (Information on Disposal for Users of Waste Electrical &...
-
Page 4: Technical Specification
TECHNICAL SPECIFICATION Model WB-2 WB-2/6KW Width Depth Height Power Rating Weight (Empty) 23.8 Weight (Full) 28.3 29.2 Water Inlet Pressure: 2 to 7 2 to 7 INSTALLATION IMPORTANT To ensure that the unit works to its full potential, you will require water pressure of at least 30psi (2 Bar). -
Page 5: Daily Use
8. If the red service light flashes five times, pauses and repeats, the incoming water pressure is too low. This can be adjusted using the internal pressure reduction valve or an external pump may have to be fitted. Ring Instanta’s technical help line for advice – 01704 502911 DAILY USE Follow instruction 4 to 6 above. - Page 6 The incoming water pressure is too high for the machine to operate The incoming water pressure is too low for the machine to operate. The water supply is turned off. The boiler has failed to fill in the allotted time. Possible causes:- 1.
-
Page 7: Guarantee
GUARANTEE Your boiler is guaranteed for two years from date of installation. Our guarantee includes on site labour and parts for problems caused by fault of manufacture and component failure with the following exclusions: Problems caused by hard water and lime scale. We regret that we cannot be held responsible for problems caused by hard water Dripping Taps.