Csd Priority Without Caller Authentication - insys icom GPRS 5.1 serial Manual

Functions

6.3.2 CSD Priority without Caller Authentication

This function makes it possible that each caller can terminate the existing data connec-
tion. In this case, the phone numbers must not be entered. Phone numbers that were
entered anyhow will not be rated.
Alternatively, the function can be set using the terminal program:
In general, activate selective call acceptance
(To activate the call signals or enable them to
be processed by the INSYS GPRS 5.1 serial,
this setting must be entered.)
Activate CSDPRIO without phone number au-
thentication
Save settings
Perform RESET, accept all parameters
52
Note
Regardless of the authentication settings, a callback number can be
stored.
INSYS GPRS 5.1 serial
AT**CLIP=1
AT**CSDPRIO=2
AT**SAVE
AT**RESET