Table of Contents
Advertisement
Mounting
9.
10. Start the program HSComm GPRS on the PC.
11. Synchronize the serial interfaces of the PC and the INSYS GPRS 5.1 serial
For the configuration, the settings of the serial interface of the PC and the
INSYS GPRS 5.1 serial must always be identical!
4.5.2 Driver Installation
The installation of a driver is not required when using a terminal program or the
software HSComm GPRS. When using another application, a driver may be neces-
sary. Please find our current drivers at http://www.insys-icom.com/driver/ or in-
stall the standard modem 336 under Windows.
16
Install the configuration software HSComm GPRS and/or your terminal
program.
At delivery, the serial interface settings of the INSYS GPRS 5.1 se-
rial are as follows: 8 data bits, no parity, 1 stop bit, data rate
19,200 Bits/s.
To synchronize the interfaces in the Software HSComm GPRS,
use the button "Synchronise RS232".
INSYS GPRS 5.1 serial
Advertisement
Table of Contents
Need help?
Do you have a question about the GPRS 5.1 serial and is the answer not in the manual?
Questions and answers