Electrolux GA55SLV User Manual page 12

12 www.electrolux.com
• The indicator
• The display shows the current
setting.
–
–
2. Press
3. Press on/off to confirm the setting.
6.6 How to set the colour of the
TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator
• The display shows a number and
letter C. Each number refers to a
different colour.
–
2. Press
colour.
3. Press on/off to confirm the setting.
6.7 AirDry
AirDry improves the drying results with
less energy consumption.
still flashes.
= the acoustic signal is
deactivated.
= the acoustic signal is
activated.
to change the setting.
.
, ,
are off.
still flashes.
= TimeBeam
deactivated.
repeatedly to change the
AirDry is automatically activated with all
programmes excluding Vorspülen /
Prélavage (if applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
,
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
• The indicators
• The indicator
• The display shows the current
2. Press
3. Press on/off to confirm the setting.
6.8 MyFavourite
This option allows to set and save the
most frequently used programme.
It is possible to save only 1 programme.
A new setting cancels the previous one.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
.
,
and are off.
still flashes.
setting
– = AirDry is deactivated.
– = AirDry is activated.
to change the setting.
, ,