34
en | Maintenance / troubleshooting
7
Maintenance / troubleshooting
Maintenance work on a radio cell covers:
–
–
–
Requirements for performing maintenance on a radio cell:
–
–
You will find more information in the corresponding document of the control panel.
7.1
Establishing factory settings
Figure 7.1: Radio gateway FWI-270
1
Proceed as follows to restore the radio gateway to the factory settings:
2019.10 | 2.0 | F.01U.373.488
Adding radio devices
Removing radio devices
Replacing the battery pack
The radio gateway has been switched to 'maintenance mode'
The relevant zone has been switched off at the control panel
All settings are deleted and reset to the factory settings!
Battery connector
S2
Operation Manual
1
Reset button
Bosch Sicherheitssysteme GmbH
Radio gateway
S2