17
The 'RCD' light will light meaning the unit is
on standby (for RCD model only).
Turn the knob clockwise to LOW sign, the
'HEATER' light will light up.
Turn the knob anti-clockwise to OFF sign;
the 'HEATER' light will switch OFF again.
Continual turn of the knob clockwise, the
temperature of the water should rise
slightly.
Allow a few seconds for the warm water
to reach the handshower, this shows that
the power setting is operating correctly.
Set the shower temperature by rotating
the Knob as necessary. Turn the knob
ON
clockwise for hotter water and anticlock-
wise to LOW sign position for cooler water.