Makita BO6050 Technical Information page 9

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear housing complete section
DISASSEMBLING
Fig. 16
1R291
Fig. 17
1R258
ASSEMBLING
Fig. 18
1R273
1R232
(27)
(29)
(26)
(29)
(27)
1R258
(27)
(29)
15. Remove Retaining ring S-30 (26)
(26)
16. Supporting Ball bearing 6906DDW (27)
with 1R258, separate the Ball bearing
from Outer spindle complete (29) by
(27)
pressing with Arbor press.
(29)
1. Set Outer spindle complete (29) on the Base
of Arbor press.
Pass Ball bearing 6906DDW (27) through
1R273
Outer spindle complete (29).
See left illustration.
2. Apply 1R232 to Ball bearing 6906DDW (27)
and apply 1R273 on 1R232.
1R232
Press the 1R273 with Arbor press.
See right photo.
3. Assemble Retaining ring S-30 (26) with 1R291.
(27)
See lower right photo.
(26)
with 1R291 from Outer spindle
complete section (29).
P 9 / 28