Makita BO6050 Technical Information page 27

W
iring diagram
Fig. D-6
Lead wire holder A
Fix Lead wires
connected to Terminal
block in Lead wire
holder A.
Tighten Lead wires
connected to Terminal
block between this
Lead wire holder and
Terminal block.
Put Lead wire (red) of
Controller to this lead
wire holder. Make sure
that it is on the top.
Fix Field lead wire (white)
in this lead wire holder.
Wiring on Motor housing
opposite of Switch knob side
Terminal block
Put Noise suppressor facing
its lead wire connected portion
to Brush holder side if it is
used.
wire connected portion
Put Led wires under
this rib.
Brush holder
P 27 / 28