Makita BO6050 Technical Information page 14

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Armature
DISASSEMBLING
1. Disassemble Gear housing complete section. See Fig. 4 - 9.
Fig. 32
Fig. 33
Fig. 34
(71)
Fig. 35
1R004-A (45)
－
(81)
(80)
(78)
Spiral spring
(43)
2. Separate Rear cover (80)
(81)
by unscrewing one 4x18
Tapping screw (81).
3. Move Spiral spring from
Carbon brush (78) to make
the Carbon brush free from the
Spring.
Remove Carbon brush (78)
by pulling up.
4. Remove Armature together with
Gear housing cover complete (43)
by tapping the edge of Motor
housing (71) with Plastic hammer.
5. Remove Retaining ring S-6 (45)
with 1R004-A.
Now Spiral bevel gear 11 (46)
can be removed.
(46)
(45)
P 14 / 28