Recall Preset Equalizer Settings; Indication Of Equalizer Settings; To Quit The Equalizer Mode; Dsa-Demo - Blaupunkt SAN FRANCISCO RDM 127 Operating Instructions Manual

Blaupunkt car stereo system user manual
Hide thumbs Also See for SAN FRANCISCO RDM 127:
Table of Contents

Advertisement

Select front "EQ " with
Select frequency band with << >> and
adjust intensity with
/ . Then press
<< >> until there is no flashing to be
seen on any frequency band.
Select "EQ " with
/ . Tune in fre-
quency band and intensity as descri-
bed previously.
Tune in all frequency bands for front and
rear one after another and store with a pre-
set button (1 to 5). To do this, depress the
button for approx. 2 seconds (Beep).
Use preset button 6 to tune all frequency
ranges to the medium setting. The manual
equalizer is deactivated.
Recall manual equalizer setting
If you want reproduction with one of the
manual equalizer settings,
press DSA briefly and
press
until "EQ" appears in the dis-
play.
Select your manual equalizer setting
with buttons 1 to 5 (press briefly).
56

Recall preset equalizer settings

/ .
If you want reproduction with one of the pre-
set equalizer setting
press DSA briefly and
press
"JAZZ", "CLASSIC", "VOCAL" or
"P-EQ OFF" appears in the display.
Select your preset equalizer setting
with buttons 1 to 5 (press briefly).
You can deactivate the preset equalizer with
preset button 6 ("P-EQ OFF" in the display).
Once the display indicates a preset equal-
izer setting, e.g. "DISCO", you can sample
all the others briefly:
Press SC,
the corresponding button number of
the sampled frequency starts flashing
in the display.

Indication of equalizer settings

When the equalizers are programmed, half
steps (in the 2 dB-grid) are also indicated in
the display. The frequency band is indicat-
ed as a full bar (4 dB-grid) after program-
ming.
until "ROCK", "DISCO",

To quit the equalizer mode

In order to quit the equalizer mode, DSA
must be pressed twice. Approx. 16 seconds
after the last setting, the equalizer mode is
deactivated.

DSA-Demo

With DSA-Demo you can demonstrate all
functions which can be set and recalled with
DSA acoustically and optically (via display).
Press DSA for approx. 2 seconds until
"DSA-DEMO" appears in the display.
First of all, the change in the sound pattern
is demonstrated by the preset equalizer lev-
els.
This is followed by the demonstration of the
HiFi setting, the various channels program-
med being indicated. Then the effect of the
manual setting is demonstrated.
Deactivate DSA-Demo
The DSA-Demo continues infinitely. To de-
activate
press DSA briefly.

Advertisement

Table of Contents
loading

Table of Contents