System Components; Connection Examples - STEINEL IS 3180 Installation Instructions Manual

BDAL_IS3180_24spr_neu

System components

IS 3180, IS 3360, IS 345
Standard installation
Installation in ceiling box
Basic element
Concealed wiring
Surface wiring
Plug-in terminals
Fitting the sensor cover
Fitting the shrouds
Screwing on the lens
Twilight setting (2 – 2000 lux)
Time setting (5 sec. – 15 min.)
Reaches for IS 3180
Mounting 20 m lens
height Setting level tangentially
1.5 m 8
–
–
–
20
2.0 m 8
–
–
–
20
2.5 m 8
–
–
–
20
3.0 m 8
–
–
–
20

Connection examples

Lamp not fitted with a neutral conductor
Lamp fitted with a neutral conductor
Connection via two-circuit switch for
manual and automatic operation
k Connection via a two-way switch for
21
manual override and automatic operation
Position I: automatic operation
Position II: manual operation
light ON permanently
Note: the system cannot be switched off,
but operated only at settings I and II.
a) Load, max. illumination 2000 W
(see Technical specifications)
25.07.2008 15:09 Uhr
Reset button for returning the twilight and
time setting to the factory setting of 2000
lux and 5 sec.
Fitting the decorative faceplate
Lens rotates for selecting basic settings:
8 m max. or 20 m max.
Lens slides for adjusting reach:
4 – 8 m or 8 – 20 m
IS 3180
Drainage hole for wall installation
(open if necessary)
Drainage hole for ceiling installation
(open with a 5 mm drill if necessary)
radially Setting level
5 m 2.5 m 4
6 m 2.5 m –
7 m 3.0 m –
8 m 3.0 m –
4.5 m 8
12 m
5 m 2.5 m 4
6 m 3.0 m –
7 m 3.5 m –
10 m 4.0 m –
20 m 4.5 m 8
6 m 3.0 m 4
8 m 4.0 m –
10 m 5.0 m –
13 m 5.0 m –
20 m 4.0 m 8
8 m 4.0 m 4
9 m 4.5 m –
12 m 5.0 m –
17 m 4.0 m –
20 m 4.0 m 8
b) Sensor connection terminals
c) Indoor switch
d) Indoor two-circuit switch, manual,
automatic
e) Indoor two-way switch, automatic,
manual override
Several sensors connected in parallel
(not illustrated)
In this case, it is important not to exceed
a sensor's maximum connected rating.
In addition, all units must be connected to
the same phase.
15
Seite 16
8 m lens
tangentially radially
3 m 2.0 m
5 m 2.5 m
6 m 3.0 m
7 m 3.0 m
9 m 3.5 m
4 m 3.0 m
5 m 3.0 m
6 m 3.0 m
8 m 3.0 m
8 m 3.5 m
5 m 3.0 m
7 m 3.5 m
8 m 3.5 m
9 m 4.0 m
10 m 3.5 m
5 m 3.0 m
6 m 3.0 m
8 m 4.0 m
10 m 4.5 m
13 m 5.5 m