Toshiba RAV-RM561FT-EN Service Manual page 74

(1)
Room A
Test
Cool
Mode
(2)
Room A
Test
(3)
Test mode
Test mode stop.
Return
Yes
12:00
Fan Speed
12:00
No
4
Push the [
the test mode. The screen (1) shown in the
left appears. (The screen (2) appears when
the operation is stopped.)
→ Perform the test mode in the "Cool" or "Heat"
mode.
→ Temperature setting cannot be adjusted
during the test mode.
→ Check codes are displayed as usual.
5
When the test mode is finished, push the [
] / [
mode" on the "Field setting menu" screen,
then push the "
button.
The screen (3) appears.
→ Pushing the "
button stops the test mode screen and
continues the normal operation.
NOTE
The test mode stops after 60 minutes and the
screen returns to the normal / detailed display.
– 74 –
ON / OFF] button to start
] button to select "1. Test
Set" [
F2
Set
Yes" [ F1]
F1
Yes
F2]