Advertisement
Quick Links
Aspley Cot
Assembly and care instructions
This cot can be assembled in a number of configurations. Instructions for all configurations are included in this manual.
Cot
RECYCLED
Packaging and instructions
printed on recycled materials
Bassinet
Save these instructions for future reference.
Chaise Lounge
SJC Brands Pty Ltd
abn.
58 106 988 578
4 Merryvale Road, MINTO, NSW 2566
t.
02 9603 5000 f. 02 9603 7000
TM
Mattress and
accessories
not included
Junior Bed
p.o. box
5878 MINTO DC, NSW 2566
e.
info@tasmaneco.com.au
w.
www.tasmaneco.com.au
Advertisement
Related Manuals for TasmanEco Aspley Cot
Summary of Contents for TasmanEco Aspley Cot
- Page 1 Aspley Cot Assembly and care instructions Mattress and accessories not included This cot can be assembled in a number of configurations. Instructions for all configurations are included in this manual. Bassinet Chaise Lounge Junior Bed RECYCLED Save these instructions for future reference.
- Page 2 Thank you Thank you for purchasing this Tasman Eco furniture. Please attach any copies of receipts or other related product documents to this page for future reference.
- Page 3 • Regularly check cot for weakness in timber joints and timber panels. If any weaknesses are found, report immediately to Tasman Eco via: www.tasmaneco.com.au • Do not use cot if it has been damaged in any way and always use genuine Tasman Eco parts. Contact your nearest Tasman Eco stockist or original place of purchase for spare parts •...
- Page 4 Major components & hardware Side panels x 2 Front and rear panels x 2 Base x 1 15mm cap screws x 12 Allen key x 1 55mm connector screws x 12 Metal lunar washers x 4 Warning Small parts can present a choking hazard. Always keep small parts out of reach of children both during and after assembly.
-
Page 5: Assembly Overview
Assembly overview Before commencing Bassinet assembly, note that Aspley cot can be assembled as a full cot, with the base set in the lower position; or as a bassinet with the base set in the high position. Step 1 - Attach the side panels to the base... - Page 6 Step 2 - Attach the front and rear fixed panels Hardware needed 8 x 55mm connector screws Gently spread the side panels apart to allow sufficient clearance for the fixed panels to placed in position without damaging the surfaces of the panels.
- Page 7 Step 3 - Tighten all connector screws To complete assembly, tighten all 12 connector screws; 4 on the base and 4 on each of the front and rear panels. Tighten the screws firmly but do not overtighten. Assembly is now complete Care &...
- Page 8 Converting the cot into a junior bed To prevent damaging the finish of your cot, we recommend these steps are best undertaken by two people. 1. To convert your Tasman Eco cot into 2. Remove the connector screws from the front a junior bed, begin by loosening all the and rear panels.
- Page 9 Converting the cot into a chaise lounge To prevent damaging the finish of your cot, we recommend these steps are best undertaken by two people. 1. To convert your Tasman Eco cot into a chaise 2. Remove the connector screws from the front lounge, begin by loosening all connector screws panel.
- Page 10 Notes...
- Page 11 Notes...
- Page 12 For claims under either the 100% Satisfaction Guarantee or the 5 year Materials and Workmanship Guarantee, please email us via our claims section on our website at www.tasmaneco.com.au or visit the store where the product was purchased.