ABB EL3000 Series Manual page 22

22
Pressure sensor
Gas connections
EL3000 CONTINUOUS GAS ANALYZERS
Dew point
The dew point of the test gases must be approximately the same as the dew
point of the sample gas.
NOTE
The notes for calibrating must be considered.
The pressure sensor is installed in the gas analyzer ex works. It is located
downstream the sample cell.
see sections
"Gas connections Limas23 (Model EL3020)" (see page 63) and
"Gas connections Limas23 (Model EL3040)" (see page 64)
| CI/EL3000-EN REV. B