Egg Turning Check Function; Water Shortage Detecting Function; Abnormal High Or Low Temperature Alarm Function; Power Failure Alarm Function - Rcom USB 50 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com

Egg Turning Check Function

▶ When starting egg turning, animation showed
on display with melody.

Water Shortage Detecting Function

▶ When water is short, humidification icon
is changed
alarm sounds after 5 min. This alarm continues
every 30 sec.
It takes about 1min. to return to normal display after
you refill water.
▶ When there is any problem on water detecting
sensor, humidification icon is changed like this

Abnormal High or Low Temperature Alarm Function

▶ When incubator temperature is different from
setting value, icon is changed
and display indicates current temp. and temp.
difference alternatively.
※ Alarm call automatically turned off after 1min. but you
should press ENTER button to switch off alarm indication.
* How to Set Abnormal High Temp. Setting (When incubator temp. is higher than setting temp.)
Select with UP/DOWN button
* How to Set Abnormal Low Temp. Setting (When incubator temp. is lower than setting temp.)

Power Failure Alarm Function

▶ When you first switch on the power, or
in case of power failure during incubation,
display shows this icon
and incubator alarm sounds for about 10sec.
Press ENTER to remove.
Egg Incubator Hatcher Rcom USB and Pro 50 User Manual
4. Other Functions
and water supplement
, and alarm sounds with message.
Set with UP/DOWN button
and incubator
(1) Egg Turning Check / Alarm for water supplement /
,
<Example>
When temp. difference is 2 , it indicates 39.5
+2.0 alternatively ( setting 37.5 )
When temp. difference is -3 , it indicates 34.5
-3.0 alternatively ( setting 37.5 )
[Setting Range: 0 ~ - 5 , Default Setting : - 3 ]
Abnormal High or Low temperatue Alarm /
Power Failure Alarm Function
[Setting Range: 0 ~ 5 , Default Setting : 2 ]
When MENU
screen is shown,
press SET UP/
BACK button
and display return
to basic screen.
When MENU
screen is shown,
press SET UP/
BACK button
and display return
to basic screen.
and
and