Input Wiring & Dimensions - Automation Direct Terminator Installation And I/O Manual

Chapter 3: I/O Wiring and Specifications
Input Wiring & Dimensions
1
2
3
4
4–Wire
Voltage
Transmitter
5
6
Transmitter Supply
18-30 VDC
7
Module Supply
24 VDC
8
NOTES:
NOTES:
1. V1 terminals are internally connected to Commons.
1. Shields should be grounded at the signal source.
9
2. Shields should be grounded at the signal source.
2. Unused inputs should be connected to Common (0 VDC).
3. Unused inputs should be connected to Common (0VDC).
3. More than one external power supply can be used,
4. More than one external power supply can be used, provided
provided all the power supply commons are connected.
10
all the power supply commons are connected.
11
0 – 5V
12
5V
13
0V
0 4095
14
A
B
C
D
3-106 Terminator Installation and I/O Manual, 3rd Edition, Rev. B
Input Channels
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8
Output Channels
C0M
COM COM COM COM OUT1 OUT2 OUT3 OUT4
Commons (not isolated)
V 0
Input Signal Ranges
–5 to 5V
0 – 10V
5V
10V
0V
–5V
0V
–4095
0 8191
Equivalent Input Circuit
9.2 (0.36)
V 1
8.1 (0.32)
–10 to 10V
10V
0V
–10V
4095
–8192 8191
48 (1.89)
8.1 (0.32)
T1F–8AD4DA–2
0 1 2 3 4 5 6 7
0 1 2 3 4 5 6 7
83.3 (3.28)
Side View
mm (in.)