Advertisement
For safe operation
•
Operating the juicer without ingredients can cause damage to the screws.
•
Do not continuously operate the juicer for more than 10 minutes. This can damage
the motor from overheating.
•
After continuous use, let the juicer rest for 10 minutes before starting another
session.
•
If the juicer stops due to the overload protection, let the juicer cool for 30 minutes to
2 hours before juicing again.
•
Do not place fingers or other objects near the food chute. Always use provided
pusher when needed. If other objects are inserted into the food chute during
operation, such materials can get stuck and damage the juicer parts and/or cause
injury.
•
Do not use ingredients containing excessive amounts of vegetable oil or animal fat.
•
Do not use the juicer to extract vegetable oil from ingredients. If vegetable/animal
oil goes inside the juicing screw, it may reduce performance and even damage the
part.
•
Do not reinsert the extracted pulp into the juicer. This can cause the juicer to stop
or cause the drum lid not to open.
•
After juicing ingredients with seeds like grapes, thoroughly clean all the crevices at
the bottom of the juicing screw.
Step 1: Top-set assembly
Note:
•
Wash the parts before first use.
1. Firmly insert the compression silicone into the slot below the pulp spout.
Advertisement
