Advertisement
Drum lid will not close
Odd noise from juicer
Extracted pulp is very
moist
Juicing bowl shakes during
operation
•
Ensure the juicing screw is pushed all the way into the
strainer for the drum lid to close properly.
•
Check if the parts are assembled correctly. Try
reassembling the parts and listen to odd noises.
•
Do not start the juicer unless there are ingredients
and/or liquid in it.
•
Operating the juicer without ingredients can cause
damage to the screw.
•
If the juicer is operated without ingredients or liquid,
the noise level can increase and can lead to damage
of the juicer.
•
If the noise occurs when ingredients are inserted into
the juicer, check the size of the ingredients. Do not
insert anything over 2.5cmin thickness.
•
Depending on the type of ingredients, the dimensions
can be small.
•
The noise can occur if the juicer is operated on an
uneven or slanted surface. Place the juicer on a
horizontal surface when operating.
•
During the very beginning of extraction, the pulp can
be moist.
•
Depending on the ingredients' condition, the
extracted pulp can be affected. Juice can be
extracted along with the pulp, especially when the
ingredient is not fresh.
•
The juicing screw and the strainer are set up to crush
and squeeze the ingredients. It is normal for the
juicing screw and the strainer to vibrate.
•
If the ingredient contains strong fibres, the vibration
from the topset may be stronger.
Advertisement
