Advertisement
Discoloration of the plastic
parts
If the juicer stops during operation
Switch the button to OFF position then press and hold the RVS (REVERSE) button until the
ingredients become dislodged.
•
Repeat RVS-OFF-ON as needed.
ON: Pulls down the food.
•
OFF: Stops the operation.
•
RVS: Pushes the food back up.
•
Note:
•
RVS pushes the ingredients back up to dislodge them. The RVS button only works
while holding down the switch.
•
Switch OFF ensuring that the juicer comes to a complete stop. Then press RVS.
Hold the RVS button for 2-3 seconds and release. Repeat as needed. Let the juicer
stop completely before using the RVS button to prevent malfunction.
•
If the juicer does not work after these steps, disassemble and clean the parts before
operating the juicer again.
•
After juicing, if the juicer is not cleaned right away, the
remaining pulp inside the topset can dry up which
can make disassembling and cleaning hard. This can
also affect the juicer's performance and colour.
•
Ingredients that are rich in carotenoids such as
carrots and spinach may dye plastic parts.
•
When the parts are dyed with carotenoids, rub
vegetable oil into the dyed areas and use mild
detergent to clean.
•
Vegetable oil should only be used during clean-up for
parts that are discoloured. Do not use vegetable oil
on the juicing screw or the strainer. If vegetable oil or
oil from animal fat gets on the juicing screw or the
strainer, it can affect the juicer's performance and
may result in damaged parts.
•
The silicone pieces on the topset can be detached
and needs to be thoroughly cleaned.
Advertisement
