Cancelling A Calling Station Message; Message Waiting - Toshiba Strata DK User Manual

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Cancelling a Calling Station Message

To cancel a message that has been set at your station
Press
...or press a [PDN] +
...or press

Message Waiting

If you call a station [DN] and it is busy or its user does not answer, you can leave a message
waiting indication by pressing the
you press the button. The user can call you back by pushing the
LED. (Voice mail devices, as well as people, can leave message waiting indications.)
All telephones have a fixed
that called the [PDN]. Telephones that own [PhDNs] can also have flexible message waiting
[PhDN/MW] buttons/LEDs for receiving/retrieving messages left by callers.
Each Message Waiting indication can accept up to four MW indications at each [DN] or
[PhDN] at one time. One of the indications for each [DN] is reserved for the Message Center
set in system programming.
To answer a Message Waiting
1. Press
LED is flashing red. If there
is no answer, hang up and try
at a later time.
2. Press
the message to terminate the
call.
3. Repeat the Steps to retrieve
additional messages.
The called party must answer—by either going off-hook or by pressing the
the indication to be cancelled automatically.
Features
The LCD Msg Select LED goes out.
The LED lights.
. The LED goes out. A personal message (10~19) remains
stored in memory.
button/LED for receiving/retrieving messages left by callers
when the Msg Your telephone rings the station or voice mail device
that set the indication. If there is no answer, the LED
continues to flash.
after receiving Voice mail devices may cancel the indication after a
short delay.
The Msg LED flashes if you have more messages.
button. The Msg LED at the called station flashes after
Message Waiting
button with the flashing
button—for
67