Extension Cords; Attachments And Accessories - Bosch CS10 Operating/Safety Instructions Manual

2610051973.qxp_CS10 7/26/19 12:35 PM Page 16
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-
wire extension cords that have 3-prong
plugs and receptacles.
NOTE: The smaller the gauge number, the
higher the cord capacity.
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
Blade
Wrench
WD7RIP Rip Fence
Vacuum hose adapters
Vacuum hoses
CSDCHUTE Dust Port Adapter

Extension Cords

If an extension cord is
necessary, a cord with

Attachments and Accessories

The use of any other attachments or acces so ries not specified in this
manual may create a hazard.
Description
Accessories
Attachments
RECOMMENDED SIZES OF ExTENSION
CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25 50 100
3-6 18 16
6-8 18 16
8-10 18 16
10-12 16 16
12-16 14 12
Included
●
●
–
–
–
–
-16-
2
Wire Sizes in mm
Cord Length in Meters
150 15 30 60 120
16 14 0.75 0.75 1.5 2.5
14 12 0.75 1.0 2.5 4.0
14 12 0.75 1.0 2.5 4.0
14 12 1.0 2.5 4.0
– – – – –
Sold Separately
●
●
●
●
●
●
–
–