Table of Contents
Advertisement
Environmental considerations
Micro Tower Type/Rack Type
c
Install the server in a clean, dust-free and well-ventilated place.
c
Install the server on a level and steady surface.
c
Never install the server upside down.
c
Ensure the following when installing the server:
- Do not expose to direct sunlight
- Do not install in locations susceptible to vibration or shock.
- Do not install near apparatus which has a strong magnetic
force or produces radio noise, (e.g. radio set, TV set, large
motor or loudspeaker etc.).
- Do not install in locations susceptible to large temperature or
humidity changes, or near an air-conditioner air vent, cooling
fan, heater or heat source
- Do not install in location where liquids or corrosive chemi-
cals are stored.
WARNING: If any foreign matter, including water, has gone
into the server, perform the shutdown steps immediately, turn
off the power button, and unplug the power cable from the
wall outlet.
Operating the server as it is might cause a fire or an electric
shock. If such trouble occurs, ask an authorized MAGNIA
service provider to inspect your server.
NOTE: Do not turn the server back on until is has completely
dried out.
If the server does not run normally after being turned back on,
contact an authorized MAGNIA service provider.
Getting Started
Environmental considerations
5
Advertisement
Table of Contents
