Table of Contents
Advertisement
176
Installing Software
Windows® 2000 Server
Installing the display driver
When installation of the Windows 2000 Server is complete, it is
required to change the driver that is automatically detected by the
Windows 2000 Server Installer to the display driver contained on
the CD-ROM of the Toshiba Server Setup Tool.
To change the display driver, follow the procedure mentioned
below:
1 Activate the Windows 2000 Server, and log in the user ID of
the Administrator or a person having the competence equiva-
lent to that of the Administrator.
2 Click right button in the "My Computer".
3 Select "Hardware" tab, click "Device Manager".
4 Double click "Video Controller (VGA Compatible)" under
"Other devices".
5 Select "Driver" tab, click "Update Driver".
6 Click "Next" in the "Update Device Driver Wizard".
7 Select "Search for a suitable driver for my device" , click Next
8 Set Server Setup Tool CD into CD-ROM drive, check at
"Specify a location", click "Next".
9 Type following driver pass to "Copy manufacture's files
from:", then click "Next".
<CD-ROM>:\Public\video\S3\SavageIX\W2k
10 Click "Next".
11 Click "Finish" in the "Finish screen".
12 Click "No" at "Do you want to restart your computer?"
Installing the network driver
1 Double click one of two "Ethernet Controller" under "Other
devices"
2 Select "Driver" tab, click "Update Driver".
Advertisement
Table of Contents
