Table of Contents
Advertisement
Before installing an additional memory module, carefully read
"Before starting operation" on page 48 and proceed as follows:
1 If the server is in operation, first shut it down and switch off the
power supply to it.
2 Unplug the power cable from the AC outlet.
NOTE: Installing a memory module while the server is still
operational could cause damage to the server or the memory
module.
3 Remove the outer covers and server panels from the server.
See "Removing and replacing the server panels" on page 54.
4 Remove the power supply unit.
See "Power Supply Unit" on page 69.
5 Extend the hooks on both sides of the memory slot outwards.
Extend the hooks
Installing and Removing Hardware
Memory module
75
Advertisement
Table of Contents
