Toshiba Magnia Z300 User Manual page 158

136
External Unit Setup
How to Connect an External Unit
When connecting External Units by External Unit control cables,
follow the procedure below.
1 Connect each Units in the following order:
System Unit
Device Bay Unit Z1
2 When one External Hard Drive Unit Z1 is connected with
SCSI connector in the backside of System Unit and the other
External Hard Drive Unit Z1 is connected with SCSI connec-
tor on PCI Card mounted in the System Unit, connect first the
former External hard Drive Unit Z1 and next the latter Unit.
3 When the RAID Card which has Two SCSI channels is
installed, connect each Units in the channel order.
The following shows an example of how external units are con-
nected to this server.
SCSI connector
SCSI cable
External Unit
control connector
External Unit
control connector
(OUT)
External Unit
control connector
(IN)
External Unit control
connector (IN)
Connecting the External Units
External Hard Drive Unit Z1
SCSI connector (IN)
External Unit Control Cable
External
PCI card (SCSI card)
MAGNIA Z300
(System Unit)
SCSI
connector
External Hard
Drive Unit Z1
External Device
Bay Unit Z1