Biamp Dynasound PRO DS1092 Manual

Biamp Dynasound PRO DS1092 Manual

Soundmasking / paging system

Advertisement

Quick Links

DS1092
Soundmasking / Paging System

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dynasound PRO DS1092 and is the answer not in the manual?

Questions and answers

Summary of Contents for Biamp Dynasound PRO DS1092

  • Page 1 DS1092 Soundmasking / Paging System...
  • Page 3 Unpacking The unit was carefully checked before leaving the factory. Inspect both the unit and its shipping container for indication of improper handling. Report any equipment damage to the distributor immediately. If the unit was shipped to you, notify the shipping carrier without delay and place your claim. Unpack the unit. It is ready to be installed.
  • Page 4 Equalization If Assistance is Required Call (800) 989-6275. If a sound level meter is available, the following spectrums are recommended: FREQUENCY 1000 1250 1/3 OCTAVE ONE OCTAVE FREQUENCY 1600 2000 2500 3150 4000 5000 6300 8000 1000 1/3 OCTAVE ONE OCTAVE C.
  • Page 5 E. Connecting and using background music 1. Connect a 40 Watt (or less) load to the 70 Volt output or an 8 ohm load to the 8 ohm output. Only one can be used at a time. Don’t attempt to use the 70 Volts and 8 Ohm outputs simultaneously. 2.
  • Page 6 Warranty repairs Dynasound warrants its products from internal failure in normal use for one (1) year, and will repair units within the warranty without charge. Improper functioning, for warranty purposes, means failure of the system to generate masking sound due the defects not caused by the owner. It does not include such owner caused malfunctions as accidental turning off of the system, readjustment of the controls, retuning of the system, or injury to the system beyond normal wear.
  • Page 7 800.218.8199 Dynasound is either a trademark or registered trademark of Biamp Systems, LLC in the United States and other countries. Other product names referenced may be trademarks or registered marks of their respective owners and Biamp Systems is not affiliated with or sponsored by these companies. All specifications are subject to change.

Table of Contents