Using Leds To Check Aip Status - Cisco CX-AIP-TM Installation And Configuration Manual

Using LEDs to Check AIP Status

Figure 21
A
B
Using LEDs to Check AIP Status
Each AIP model has three status LEDs on its faceplate. (See Figure 22.)
Figure 22
30 Asynchronous Transfer Mode Interface Processor (AIP) Installation and Configuration
Attaching CAB-ATM-DS3/E3 and EMI Filter Clip to E3 or DS3 PLIMs
To RX of switch
D
AIP LEDs
White insulator
White insulator
To TX of switch
C
EMI filter
clip