Advertisement
Total mass for load: 17KG
Controller: Radio RC4GS
Note: The controller uses 6 AA batteries, the main truck battery is 11.1V3S lithium battery or
12V battery, and the battery connector is XT60.
Operation steps:
1. Turn on the controller (the switch or knob of the controller should be in the default
position)
2. Connect main vehicle power supply.
3. Wait for the confirmation sound (Around 5 sec) before moving the controls on the TX,
otherwise this can cause the ESC to enter settings mode and the truck won't operate
properly.
Battery Requirements:
The battery size can be within 142 * 45 * 40MM, using 3S lithium battery. The voltage
cannot be lower than 11.1V. The battery and the battery monitor need to be purchased
separately.
Reference Images：
Pay attention to the positive and negative direction, or you can
severely damage the battery or ESC.
8
Advertisement
