Download Print this page
RC4WD Gelande II Assembly Manual
Hide thumbs Also See for Gelande II:

Advertisement

1/10 SCALE 4x4 TRUCK KIT

Advertisement

loading

Summary of Contents for RC4WD Gelande II

  • Page 1 1/10 SCALE 4x4 TRUCK KIT...
  • Page 2 Use good quality hex drivers to avoid stripping screw heads. Use thread lock when putting metal screws into metal parts. Note: Steps marked with an asterisk (*) require thread lock. Use thread lock sparingly. Do not over tighten screws otherwise you may strip the thread. RC4WD G2 rc4wd.com...
  • Page 3 RC4WD Limited Warranty All RC4WD products are warranted to be free of defects in materials and workmanship when new. Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user's failure to perform routine maintenance, addition of aftermarket parts or option parts.
  • Page 4 All of the hardware should be taken from Bag E Parts can be found in Metal Parts Bag F RC4WD G2 rc4wd.com...
  • Page 5 Plastic parts can be found in parts Bag G RC4WD G2 rc4wd.com...
  • Page 6 RC4WD G2 rc4wd.com...
  • Page 7 RC4WD G2 rc4wd.com...
  • Page 8 10 * This step should be done on both frame rails 11 * 12 * RC4WD G2 rc4wd.com...
  • Page 9 13 * 14 * RC4WD G2 rc4wd.com...
  • Page 10 15 * 16 * 17 * RC4WD G2 rc4wd.com...
  • Page 11 18 * RC4WD G2 rc4wd.com...
  • Page 12 19 * 20 * RC4WD G2 rc4wd.com...
  • Page 13 21 * 22 * RC4WD G2 rc4wd.com...
  • Page 14 23 * RC4WD G2 rc4wd.com...
  • Page 15 24 * 25 * RC4WD G2 rc4wd.com...
  • Page 16 27 * RC4WD G2 rc4wd.com...
  • Page 17 28 * RC4WD G2 rc4wd.com...
  • Page 18 30 * 31 * RC4WD G2 rc4wd.com...
  • Page 19 32 * 33 * RC4WD G2 rc4wd.com...
  • Page 20 34 * RC4WD G2 rc4wd.com...
  • Page 21 36 * Fit drive shaft rings RC4WD G2 rc4wd.com...
  • Page 22 Fit both front and rear drive shafts 39 * RC4WD G2 rc4wd.com...
  • Page 23 40 * 41 * RC4WD G2 rc4wd.com...
  • Page 24 42 * Note: Servo and servo horn are not included in this kit RC4WD G2 rc4wd.com...
  • Page 25 43 * 44 * RC4WD G2 rc4wd.com...
  • Page 26 Note: Wheels & tires may already be assembled in this kit so steps 45 – 50 may not be required but are included for future reference. Insert the ring inside the tire RC4WD G2 rc4wd.com...
  • Page 27 Place the rear wheel half inside the ring Ensure that the tire bead is evenly captured in the wheel rim. The tire may need to be pulled out a little to make it sit properly. RC4WD G2 rc4wd.com...
  • Page 28 Place the front wheel half inside the ring. Ensure that the wheel design is aligned front and rear. Ensure that the tire bead is evenly captured in the wheel rim. The tire may need to be pulled out a little to make it sit properly. RC4WD G2 rc4wd.com...
  • Page 29 Place the wheel hub on the rear of the wheel and insert a long bolt (M2.5 x 12mm) through the wheel Install a nut and tighten onto the long bolt. Make sure the tire bead is evenly captured while tightening the nut RC4WD G2 rc4wd.com...
  • Page 30 Install the second bolt (M2.5 x 8mm) and nut. Make sure the tire bead is evenly captured while tightening the nut Fit all of the remaining bolts and nuts. Swap the long bolt that was fitted for the shorter bolt RC4WD G2 rc4wd.com...
  • Page 31 Fit all four wheels RC4WD G2 rc4wd.com...
  • Page 32 RC4WD G2 rc4wd.com...
  • Page 33 Z-S0401 M3 Offset Short Plastic Rod End Z-B0008 1/10 Land Rover Defender D90 Hard Plastic Body Kit Z-B0034 Land Rover Defender D90 Hard Body Spare Parts Assortment Z-S0687 Land Rover Defender D90 Door Handles Z-B0038 D90 Body Decal Sheet Z-U0024 Hammer Transfer Case RC4WD G2 rc4wd.com...
  • Page 34 Z-S0006 #1 Aluminum Bumper Mount For Trail Finder 2 Z-S0597 Shock Hoops for Trail Finder 2 Chassis Z-U0029 Triton Transfer Case (1:1 ratio) Mailing Address: RC4WD 2016 Senter Road San Jose CA 95112 Web: rc4wd.com Email: rcrock@rc4wd.com RC4WD G2 rc4wd.com...