Advertisement
Face Installation
1
Remove the glass frame (see owner's manual for details). Remove the two mounting bracket nuts and
bushings (see "a" Figure 9). Use the included screws to attach the face mounting brackets (see "b"
Figure 9). Replace the nuts removed earlier (without bushings) to further secure the brackets.
2
The bottom shield must be mounted to the face prior to installation. Pre-thread the five holes on the back
side of the face (use one or more of the 8-32 x 5/8" Swaged Screws - see Figure 10). Attach the bottom
shield to the face with the five 8-32 screws (see Figure 11).
Special Instructions for Brushed Aluminum
Make sure to handle the brushed aluminum with gloves to prevent staining.
Page 6 of 8
Shadowbox Face (564) Installation Instructions
Satin 95400424
Figure 10
17601627 - 8/20/10
Nickel 95400423
Figure 9
Figure 11
© Travis Industries, Inc.
Advertisement
