Error Log; Resetting The Controller - Pentair FLECK 5800 XTR Installer Manual

Parameter
Reserve (only Displays the reserve volume based on the reserve type selected under master
available for settings.
softener meter
delayed
regeneration type)
Software Version Displays the software version installed on the controller.
No. of Regens Displays how many manually and system initiated regenerations the system
has gone through since last reset.
Regen. Interval Displays the average length of time between regenerations based on the past
four regenerations.
Daily Usage Displays average water usage for each day of the week based on the usage on
that day for the past six weeks. Enter the parameter to display average water
daily usage. Select each day to display daily consumption for each day of the
past six weeks together with dates. Use the arrows
to diagnostics screen.
Usage Since Displays water usage since last regeneration.
Regen.
Last Settings Displays the time occurred after the last update to master settings.
Change
Seal Life Not available.
6.4.1

Error log

Error log screen shows the list of logging attempts with date and time. From the diagnostics
screen press to display the error log screen.
To clear all error logs, press
1201 at the password prompt screen and press
6.5

Resetting the controller

From the master settings screen press
Ref. MKT-IM-006 / E - 12.11.2019
Installer manual Fleck 5800 XTR - Programming
Description
Error Log
# date
error log empty
to activate the button, press
to validate.
to display the reset screen.
and to come back
time
again to clear the list. Then enter
85 / 126