External Audio Sources; Specifications; Switching The Aux Input On/Off; Input Sensitivity - Blaupunkt MILANO MP26 Operating Instructions Manual

External audio sources

External audio sources
Instead of the CD changer, you can also
connect another external audio source
equipped with a line output. Audio sources
can, for example, be portable CD players,
MiniDisc players or MP3 players.
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
Note:
If no CD changer is connected, the AUX
input must be switched on in the menu.

Switching the AUX input on/off

u Press the MENU button 5.
The display shows "MENU".
u Press the
or
until "AUX OFF" or "AUX ON" appears
on the display.
u Press the
or
AUX on or off.
When you have fi nished making your chang-
es,
u press the MENU button 5.
Note:
If the AUX input is switched on, you
can select it by pressing the SRC
button 4. "AUX INPUT" then appears
on the display.
56
button 8 repeatedly
button 8 to switch
Specifi cations
Amplifi er
Output power:
Tuner
Wavebands in Europe:
FM :
MW :
LW :
FM frequency response:
CD
Frequency range:
Pre-amp out
4 channels:

Input sensitivity

AUX input:
Subject to changes!
Specifi cations
4 x 18 watt sine
according to
DIN 45 324
at 14.4 V
4 x 45 watt max.
power
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
35 - 16,000 Hz
20 - 20,000 Hz
3 V
2 V / 6 kΩ