Avaya VSP 7000 Series Installing page 25

Ensure the cables ends are stripped and that the cables are an appropriate length and gauge for the
installation.
Procedure
1. Connect a grounding cable from ground to the DC power supply ground terminal.
2. Connect the DC leads to the positive and negative DC power supply terminals.
3. Tighten the screws on the terminal blocks to secure all cables.
4. Attach the opposite ends of the DC leads to a 48–volt DC power source.
August 2014
Comments? infodev@avaya.com
Power connections
Installing Avaya VSP 7000 Series
25