Advertisement
Quick Links
RainPro RM4000-3 Rain to Mains Backup Valveset
Installation Guide & Owners Information
MODELS: RM4000-3, RM6000-3, RM7000-3, RC450-3, RC750-3, RM4058
** Please leave this guide in a safe place for the owner **
IMPORTANT INFORMATION
MANDATORY INSTALLATION CONDITION: THE PREMISES WHERE THE PUMP IS INSTALLED
MUST BE PROTECTED BY AN RCD (SAFETY SWITCH) – DO NOT INSTALL PUMPS WITHOUT
THIS PROTECTION
• All parts shown are WaterMarked & certified for Potable Water
• Fittings may differ from the image shown
• Do not adjust the PRV, warranty is void if adjusted
• Flooded suction only, no suction lift unless a float switch is added in the rainwater tank
• A Y-Strainer or Pre-filter MUST be installed in the suction pipe between the rainwater tank and the pump
– warranty is void if this is not fitted
• Read and follow the instructions in the pages following
IMPORTANT: if installing close to a wall or other fixture, use barrel-
union connections to allow removal if ever required.
Page
Ascento Group Australia P: 1800 807 604 E:
1
REEFE External Pump System with
WMK Licence: WM-022109
Australian Standard: WMTS-477
csv@ascento.com.au
WaterMark Quality System Doc # RQS.1010
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reefe RainPro RM4000-3
Summary of Contents for Reefe RainPro RM4000-3
- Page 1 REEFE External Pump System with RainPro RM4000-3 Rain to Mains Backup Valveset Installation Guide & Owners Information MODELS: RM4000-3, RM6000-3, RM7000-3, RC450-3, RC750-3, RM4058 ** Please leave this guide in a safe place for the owner ** WMK Licence: WM-022109...
- Page 2 Page Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au WaterMark Quality System Doc # RQS.1010...
- Page 3 Page Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au WaterMark Quality System Doc # RQS.1010...
- Page 4 Page Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au WaterMark Quality System Doc # RQS.1010...
- Page 5 Page Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au WaterMark Quality System Doc # RQS.1010...
- Page 6 Page Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au WaterMark Quality System Doc # RQS.1010...
- Page 7 Page Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au WaterMark Quality System Doc # RQS.1010...
-
Page 8: How The System Works
WARNING: NO RCD/SAFETY SWITCH IN THE POWER CIRCUIT? DO NOT INSTALL PUMPS!! RainPro RM4000-3 Rainwater & Mains Water Backup System How the system works; 1. When the Rainwater tank is empty/nearly empty, the pump controller will sense there is insufficient water and turn the pump off. - Page 9 Installation Instructions and Checklist • All installations must be in accordance with AS/NZS 3500.1 • Maximum Pressure - A pressure reduction valve must be fitted if mains supply exceeds 500kPa as per AS/NZS 3500.1 • Maximum Temperature – for Coldwater use only. INSTALLATION GUIDE : TICK AS COMPLETED AND LEAVE THIS FOR THE OWNER TICK AS COMPLETED...
-
Page 10: Things To Check Before You Call For Service
Plug the pump’s power lead into the power outlet provided, which must be installed by a licensed Electrician according to Electrical Regulations. IMPORTANT CONDITION OF WARRANTY: Step 11 1) The power outlet used for the pump MUST BE protected by a RCD (Safety Switch) – do not install pumps without this protection. - Page 11 (not something else) and if you are certain it is the pump that is causing the problem, log a ticket if it is in warranty period, at www.reefe.com.au/warranty/ If out of warranty search the internet for “pump repairs in my area”...
- Page 12 If you prove that it is the pump, do not plug it back in, have it replaced immediately. If it is in warranty log a warranty claim here: www.reefe.com.au/warranty/ or mail us at PO BOX 650 MORNINGSIDE QLD 4170 or send an email to csv@ascento.com.au...
- Page 13 RainPro™ RM4000-3 Water Controller - Spare Parts Order Code Description Price inc GST* RMV3550 RainPro RM4000-3 Valve Assembly 8379 RainPro RM4000 Pressure Controller *external pumps only* Pump As per the model supplied AFTER SALES SERVICE : - Not normally necessary, however if you have any queries please call 1800 807 604...
- Page 14 domestic generator, power supply of voltage less than 230V, power supply of voltage above 240V - are not covered by warranty. Improper use is defined by us, at our sole discretion. 4. The complete Impeller set (including shaft), Seals and O-rings are all wearing items and therefore are not covered for “normal wear and tear”. They are covered by this warranty if they fail due to a manufacturing defect.
Need help?
Do you have a question about the RainPro RM4000-3 and is the answer not in the manual?
Questions and answers