Projection On The Screen; Lens - Toshiba TLP-B2U Owner's Manual

Projection on the screen

CAUTION – Do not look into the projection
lens while operating the projector.
Indicators
Preparation
Install and connect the projector properly.
1
Take off the lens cover.
2
1 Press ON/STANDBY.
The projector turns on and both the ON and LAMP
indicators light up in green.
All of the buttons on the main unit will also light.
(Green)
The lamp lights and the start up display appears.
2
Turn on the connected equipment and put it
in playback mode.
ON LAMP ON LAMP
Flashing
(Green) (Green)
(Green)
CONTENTS
25
Continued