Toshiba TLP-B2U Owner's Manual page 43

Adjusting audio output (Continued)
ENTER
(When selecting "Volume" in step 3.)
4
Adjust the Volume by pressing
(When selecting "Channel select" or "Output select" in step 3.)
1 Press ENTER.
The setting screen selected appears.
ENTER
2 Change the selection by pressing
Channel select:
You can switch the channel of the sound developed from the
speaker(s).
Left + Right: To develop both left and right input audio signals.
ENTER
Left:
Right:
Output select:
You can select the sound developed from the speaker(s)
regarding of the input switching.
Always:
Video only: To develop sound at VIDEO input.
RGB only:
5 Press MENU several times until the full
MENU
menu screen disappears.
MENU
Notes
• Pressing the MENU button will return to the previous setting screen.
• You can adjust the "Volume" for every input source (RGB, Video).
• The value(s) adjusted and/or setting(s) is memorized.
• Press the RESET button, the menu screen disappears.
(–): To turn down.
(+): To turn up.
To develop only left input audio signal.
To develop only right input audio signal.
To develop sound regardless of input sources types.
To develop sound at RGB input.
CONTENTS
43
/ .
/ .