Projector placement angle adjustment
The tilt of the projector can be adjusted using the foot adjuster.
1
PUSH
Foot adjuster
release button
2
2750
Lift up
Notes
• To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.
• Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.
Lift the front of the projector until a tilt angle desired is
obtained and hold down the foot adjuster release button.
The foot adjuster will stretch.
Release the button to lock in position.
Foot adjuster
Turn the foot adjuster to make fine adjustment of the
height.
Turn clockwise to lift up.
Turn counterclockwise to lower.
Lower
CONTENTS
19