Toshiba TLP-B2U Owner's Manual page 45

Setting the input signal (Continued)
4 Change the selection by pressing
Picture mode:
Bright:
True color:
Video mode:
Auto:
NTSC, NTSC4.43, PAL, PAL-N, SECAM, PAL60, PAL-M
No signal background:
TOSHIBA logo: To set TOSHIBA logo on the background at
Blue background: To set blue screen on the background at no-
No signal power off:
OFF:
5 minutes : The power turns off automatically if the no
To set the picture with its brightness priority.
To set the picture with its picture quality
(color) priority.
To determine the kinds of video signal
entered automatically. If not determined
properly, select the kind of signal among the
signals shown below.
no signal status.
signal status.
The power does not turn off automatically
even if the no signal status continues.
signal status continues for approx. 5 min.
CONTENTS
45
/ .
Continued