Projection On The Screen - Toshiba TLP380 Owner's Manual

Projection on the screen

CAUTION – Do not look into the projection
lens while operating the projector.
Remote control
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
MENU
VOL / ADJ
ENTER EXIT
CT-90113
Control panel
(Main unit side)
ON / STANDBY
1
VOL / ADJ
Preparation
1 Install and connect the projector properly.
2 Take off the lens cover.
1
1
1
Notes
Indicators
• The startup screen disappears when you push the EXIT button or wait for a while. You can
also set the startup screen not to be displayed on the menu screen.
• When a projector is used for the first time, the language selection menu is displayed after the
startup screen disappears. Set it up with procedures 2 and 3 on the next page.
Press ON/STANDBY.
ON/STANDBY
The projector turns on and the ON, LAMP and FAN indicators
light in green.
ON/STANDBY
(The LAMP indicator blinks while the lamp is warming up.)
ON / STANDBY
(Green) (Green
Flashing)
The lamp lights and the start up display appears.
CONTENTS
ON / STANDBY
(Green) (Green) (Green)
51
Continued
28
(Green)