Toshiba B-FP3D Series Maintenance Manual page 29

2. MAJOR UNIT REPLACEMENT
6) Remove the Peel-Off unit connector from the CPU PCB Board including the harness.
CPU PCB Board
Peel-Off Unit
7) Replace the Peel-Off Unit with a new one, and then perform reassembly in the reverse order of removal.
For the GH model, attach a new adhesive tape after re-installing the Thermal head assembly. (Refer to
Section 2.1.)
Peel-Off Unit
2-25
(Revision Date: Aug., 2017)
2.8 Replacing the Peel-Off Unit
Harness Inside routing
Top view harness routing
EO18-33032