Headlamp Bulb Replacement - Mahindra THAR m2DiCR Owner's Manual

MAINTENANCE
12.5.10 Checking the Wiper Blades
Lift the wiper arm from its position. Expose the blade lip for
inspection. Clean the wiper blade lips with water applied with a soft
sponge. If the wiper blade is not wiping the glass satisfactorily or is
worn-out, cut, cracked or bulging get it replaced at an Authorized
Mahindra Dealer.
12.5.11 Changing the Wiper Blade
Lift the arm and position the wiper blade at right angles to
1.
the wiper arm
Press the retaining clip in the opposite direction, disengage
2.
the wiper blade and pull it off the arm
12-14
To prevent damage to the windshield, don't let the wiper arm slap
down on to it.
Hold the end of the rubber and pull until the tabs are free of
3.
the metal support
Carefully insert the new blade rubber. Then install the blade
4.
assembly in the reverse order of removal

12.6 Headlamp Bulb Replacement

The head lamp bulb can be replaced without removing the head
lamp assembly from the vehicle.
To replace the head lamp bulb;
• Ensure ignition is switched OFF
© Copyright Mahindra and Mahindra Ltd.062016