General; Lubricants And Capacities - Mahindra THAR m2DiCR Owner's Manual

2 GENERAL

2.1 Lubricants and Capacities

System
Lubricant
MAHINDRA "MAXIMILE FEO V2"
Engine Oil
NEW TECHNOLOGY GENUINE ENGINE FLUID
MAHINDRA "MAXIMILE ULTRA
Engine Cooling
(READY TO USE COOLANT. NO NEED TO MIX WATER)
MAHINDRA "MAXIMILE SYNTEC
Transmission
NEW GENERATION GENUINE TRANSMISSION OIL
MAHINDRA "MAXIMILE SYNCHRO
Transfer Case
(4WD)
NEW GENUINE TRANSMISSION FLUID
Front & Rear Axle Oil MAHINDRA "MAXIMILE ELITE"
SHELL "SPIRAX S3 ATF MD3" /
Power Steering
CALTEX "TEXAMATIC 1888"
MAHINDRA "MAXIMILE DOT 3"
Brake and Clutch
Diesel confirming to - Indian
Standard IS 1460; 2010 BSIV /
Recommended Fuel
BS III specification or equivalent
© Copyright Mahindra and Mahindra Ltd. 062016
Capacity
7.0 liters
8.0 liters
COOL"
2.0 liters
F2"
1.6 liters
UV2"
1.75 liters
0.8 liters
0.9 liters
GENUINE BRAKE FLUID
45 liters
Specification
Remarks
For other than Maximile brand, the oil change interval has to be
Special Engine
reduced to 10000 km if the oil meets minimum of API CH-4
Fluid
SAE 15W-40 specification
Brand Specific. Don't use other coolants / water for top up. In case of
emergency, coolant meeting JIS K-2234 specification should be used (30%
concentration diluted with distilled water) and coolant change period to be
reduced as 30,000 km
If Maximile GO SYNCHRO 80W-90 is used, the oil change
interval has to be reduced to 40,000 km. For other than
Special
Maximile brand, the oil change interval has to be reduced to
Transmission
20000 km if the oil meets minimum of API GL-4 SAE 80W-90
Fluid
specification
Special
Transmission
Fluid
If Maximile DO EXL is used, oil change interval should be
reduced to 30,000 km. For other than Maximile brand, the oil
Special Axle
change interval has to be reduced to 20000 km if the oil
Fluid
meets minimum of API GL-5 SAE 80W-90 specification
Brand Specific, No other brand to be used
Brake Fluid Meeting SAE J1703; FMVSS No.116 DOT 3 or IS 8654 Type-1
Specification
Use only recommended oil
—
GENERAL
2-1