CleanStar HIPSTAR Instruction Manual

CleanStar HIPSTAR Instruction Manual

Hipvac vacuum cleaner

Advertisement

Quick Links

HIPVAC VACUUM CLEANER
Please read this Instruction Manual carefully before operation and follow
all guidelines before using this vacuum cleaner.
Please keep this Manual for future reference.
Instruction Manual
Model: HIPSTAR
TABLE OF CONTENTS
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HIPSTAR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CleanStar HIPSTAR

  • Page 1 Instruction Manual HIPVAC VACUUM CLEANER Model: HIPSTAR Please read this Instruction Manual carefully before operation and follow • all guidelines before using this vacuum cleaner. TABLE OF CONTENTS Please keep this Manual for future reference. •...
  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION When using your Vacuum, basic safety precautions should always be observed, Including the following: WARNING – Read Instruction Manual before using this product. Failure to do so can result in serious injury or death. To reduce the risk of fire, electric shock, or injury. Use only as described in this manual.
  • Page 3: Getting To Know Your Vacuum Cleaner

    GETTING TO KNOW YOUR VACUUM CLEANER Hose handle 11. Dusting brush Power cord 12. Crevice tool Exhaust grill 13. Upholstery tool Release button for exhaust grill 14. Pre-motor foam filter Main body 15. Exhaust filter 16. Waist strap Release button for air inlet cover Dust bag cover 17.
  • Page 4: Dust Bag Installation

    OPERATING INSTRUCTIONS 1. DUST BAG INSTALLATION Open the triangular shaped dust bag cover by gently pressing one end of the locking bar to release the locking mechanism. Grasp the cover in your hand, lifting the upper corners of the cover away from the vacuum housing. Slide the bottom edge of the cover away so the hinges on the cover slip out of the housing.
  • Page 5: Hose Connection

    2. BELT The belt locking clip is designed to hold the vacuum Securely around your waist while working. To connect: Simply insert the toothed connector into the belt buckle until it snaps into place. To disconnect: Gently squeeze the outer clips together, and pull connector out of belt buckle.
  • Page 6: Exhaust Filter

    4. BELT Insert the handle into the telescopic wand then insert the wand into the floor brush. Adjust the length of the telescopic wand by pressing Its button and altering the wand length. When vacuuming Stairs it is recommended that the wand is adjusted to its shortest length.
  • Page 7: Conditions Of Warranty

    Thank you for purchasing your new Cleanstar product. We are confident this product will give you trouble-free use and excellent service, provided the operator uses and maintains the product in accordance with the Instruction Manual. Please read the Instruction Manual carefully before using the product for correct operation and maintenance procedures, and store it in a safe place for future reference.
  • Page 8 If the product was serviced or repaired by anyone other than Cleanstar, or one of Cleanstar’s Authorised Service Agents (ASA). • Cleanstar is unable to accept any responsibility under this warranty for any repair work not carried out by an ASA or from the use of non-genuine parts.

Table of Contents