Magnetic Sensor Does Not Work - Samsung SM-G973F Service Manual

8. Level 3 Repair
8-4-9. Magnetic sensor

Magnetic Sensor does not work

Check the voltage
C5074 =1.8V
Check U5024's package, smd status
(crack, open, short, etc.)
Check R5008, R5009
(I2C is OK?)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Yes
No
Yes
No
Yes
No
Yes
No
END
No
No
No
(If there is still out of order, replace UCP5000)
Replace U5011
Replace U5024
Replace U5004