Samsung SM-G973F Service Manual page 33

6. Level 1 Repair
4. Start downloading the binary files into the device by clicking Start button on the
screen. The green colored "PASS!" sign will appear on the upper-left box if the
binary files have been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
You can perform Factory data Reset by Settings → General Management → Reset
※ Caution. Never disconnect during the S/W downloading.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
*#1234#