TEC B-450-QP SERIES Owner's Manual page 19

8. LOADING THE PAPER ENGLISH VERSION EO1-33005
8. LOADING THE PAPER
Strip type:
1 Strip the labels from the backing paper for about 200-mm long from the top edge of the label roll.
2 First push the strip lever toward the printer to release the hook, and then pull the strip lever.
3 Pass the backing paper between the strip roller and the strip guide roller. After taking up any slack of
the paper, set the strip lever in position.
Strip Lever
Strip Guide Roller
Backing Paper
Fig. 8-10
E8-4