TEC B-450-QP SERIES Owner's Manual page 18

8. LOADING THE PAPER
NOTE: Pass the paper straight from the supply holder to paper outlet. Failure to do this may cause
skew feeding or paper jam.
A
.
A = B
.
B
8. Close the top cover. Paper loading is now completed.
Batch type:
Cutter type: Where a cutter is fitted load the paper as standard and feed it through the cutter module.
NOTES: 1. When using the cutter, be sure to cut the backing paper between the labels. Cutting
on the label will cause the glue to stick to the cutter, which may affect the cutter quality
and shorten it's life.
2. Use of tag paper that exceeds the specified thickness may affect the cutter life.
Cutter Module
Paper Outlet
Paper
Paper
Platen
E8-3
ENGLISH VERSION EO1-33005
Paper Guide
Top Cover
8. LOADING THE PAPER
Supply Holder
Fig. 8-7
Fig. 8-8
Fig. 8-9