Panel View; Front Panel - Integra CDC-3.4 Service Manual

PANEL VIEW-1

FRONT PANEL

1 2
Standby/On button
1
This button is used to set the CDC-3.4 to On or
Standby.
Standby indicator
2
This indicator lights up when the CDC-3.4 is
in Standby mode.
3 Repeat button
This button is used with the Repeat function.
Random button
4
This button is used with the Random function.
Dimmer button
5
This button is used to adjust the display brightness.
Display button
6
This button is used to display elapsed, remaining,
and total time information about the current disc or
track and various information about MP3 tracks.
7 Remote control sensor
This sensor receives control signals from the remote
controller .
Display
3 4 5 6 7 8
15 14 13
Disc tray
Open/Close
8 button
This button is used to open and close the disc tray.
9 Disc Select buttons
These buttons are used to select discs. Playback
starts automatically when a disc is selected with one
of these buttons.
Play/pause button
10
This button is used to start and pause playback.
Stop button
11
This button is used to stop playback.
[ ]
[ ]/[ ] & Folder
12
These buttons are used to select the previous and
next tracks and to navigate folders on MP3 discs.
[ ]
[ ]/[ ] & Folder
13
These buttons are used for fast reverse and fast
forward and to navigate folders on MP3 discs.
Disc Skip button
14
This button is used to turn the disc tray when
loading or removing discs and to select discs for play-
back.
Disc tray light
15
This light illuminates the disc tray. It comes on
when the CDC-3.4 is turned on and gets brighter
when the disc tray is open.
CDC-3.4
9
12 11 10
[ ]
/ buttons
[ ]
/ buttons